The goal is to create processing formula that generates drainage slots in equal distance on divided frame, when total length of its profile cannot be read by variable in processing formula editor after its dividing. First, lets divide profile with splice with 275 mm left offset from its length midlepoint. Select profile by right mouse button and choose Add profile...
Go to General > Settings > Saw settings In saw settings windows set up: User name By entering a number in this field you can modify the generation of the first two digits of the file name. If you leave the entry field empty, the file name is made up of the year and month, followed by a four-digit number....
Go to General > Settings > User settings: To create, change or delete users click Administration button: You will be asked for administration password, which was created on installation time. If you did not specify this password, leave field empty and confirm OK: Click button New user and define new user’s name. Warning: Change immediately ‘New user’ name to real...
Not all Schuco profiles are existing in PBX Schueco CAM software. If you cannot find profile number, you must create one. This process is performed by exporting profile file from Schucal and importing it to SchueCAM. Let’s go through the example of creating two profiles: no. 435940 and 435950. To do that, open Schucal first and go to General >...
Go to General > Settings > Saw settings: In saw settings windows set up: Current user By entering a number in this field you can modify the generation of the first two digits of the file name. If you leave the entry field empty, the file name is made up of the year and month, followed by a four-digit number....
Create or open the project and go to Output > Order list In Output option windows click Optimization settings Check Manipulate optimization Confirm OK, then Click OK on Output options window. Since now, always when you will prepare Order list, you will see form to edit optimization values, including bar lengths. Change value in Fixed length column to desired: Confirm OK...